MS Angle Suppliers in Pune | Dealers, Stockiest, Distributors in Pune – SM Enterprises
SM Enterprises, leading (Mild Steel) MS Angle suppliers in Pune, dealers, distributors and stockist in Pune, are offering top qualities of MS angles, which are specifically L-shaped cross-section types used in the construction of various structures and buildings.
The commonly used angle is a 90-degree angle, which has two sides of equal length and width. These are formally made from primary compounds such as iron and carbon and also other elements for improving performance such as manganese, silicon, and sulfur and phosphorous and copper. This whole combination takes place with greater hardness and flexibility.
Types of our MS Angle suppliers and dealers in Pune:
Being the best MS angle distributors and stockiest in Pune, we are providing top qualities of MS angles that are made with new designs and mechanisms. Here we have listed down certain types, such as:
- Equal Angle : These MS angles are highly used in bridges and buildings where equal balance and strength are required. Both legs are shaped with an “L” shape and are available in multiple sizes, such as 25mm x 25mm, 50mm x 50mm, and larger.
- Unequal Angle : One leg is longer and the other is shorter in this formation. These are mostly used in the different load-bearing capacities needed on each leg, such as in support beams, trusses, and framing systems. These are available in multiple sizes, such as 40mm x 20mm, 100mm x 50mm, etc.
- Hot Rolled Angle : These MS angles are made by heating steel and rolling it to make an angle and are highly used in structural projects such as bridges, towers and buildings. Due to its heating structure, these are highly stronger, thicker and have a rough surface.
- Galvanized Angle : An additional layer of zinc coating is applied on the angles to improve the structural integrity. This helps maintain a higher performance even in any kind of environmental conditions. These are suitable for use in outdoor applications such as fences, signposts and guard rails.
Technical Features of our MS Angle:
We have mentioned a technical sheet below for more information about our MS Angle:
| Technical Specification | Equal Angle | Unequal Angle | Hot Rolled Angle | Galvanized Angle |
|---|---|---|---|---|
| Material | Mild Steel (IS 2062, ASTM A36, EN 10025) | Mild Steel (IS 2062, ASTM A36, EN 10025) | Mild Steel (IS 2062, ASTM A36, EN 10025) | Mild Steel (Hot Dipped Galvanized) |
| Size Range (Width x Height) | 20x20 mm to 250x250 mm | 30x20 mm to 200x150 mm | 20x20 mm to 250x250 mm | 20x20 mm to 200x200 mm |
| Thickness Range | 3 mm to 25 mm | 3 mm to 20 mm | 3 mm to 25 mm | 3 mm to 20 mm |
| Surface Finish | Black | Black | Hot Rolled Surface Finish | Galvanized Zinc Coating |
| Weight Range | 1.1 kg/m to 37.3 kg/m | 1.3 kg/m to 35.6 kg/m | 1.3 kg/m to 35.6 kg/m | 1.3 kg/m to 35.6 kg/m |
| Manufacturing Process | Hot Rolled | Hot Rolled | Hot Rolled | Hot Rolled and Hot Dip Galvanized |
| Standard Length | 6 meters, 12 meters | 6 meters, 12 meters | 6 meters, 12 meters | 6 meters, 12 meters |
| Tensile Strength | 410 MPa (min) | 410 MPa (min) | 410 MPa (min) | 410 MPa (min) |
| Yield Strength | 250-330 MPa | 250-330 MPa | 250-330 MPa | 250-330 MPa |
| Coating Thickness (For Galvanized) | Not Applicable | Not Applicable | Not Applicable | 40-80 microns (Typical Zinc Coating) |
| Corrosion Resistance | Moderate | Moderate | Moderate | High |
Characteristics of our MS Angle suppliers and dealers in Pune:
As former MS Angle distributors and stockiest in Pune, our all MS Angles are installed with new advanced technological mechanisms such as:
- Improved Strength and Durability : These MS Angles are made with a fine combination of external elements for achieving greater hardness and strength. These all steel grades are made under the process of high-strength-low-alloy (HSLA), which increases the performance and meets all environmental sustainability.
- Precision Manufacturing with Laser Cutting : Our all MS angles are made with advanced technological manufacturing processes such as laser cutting. This process helps with accurate cutting methods without any labor cost, and the whole process is done with remote computational methods. This results in better fitting of angles in any kind of application or machine.
- Customization Through 3D Modeling and CAD Integration : Due to the integration of 3D modeling and CAD integration, these angles can be made under CNC machines. This feature unlocks the creativity for making MS angles in any size and shape. It helps with rapid prototyping and better collaboration with designers and manufacturers.
- Enhanced Corrosion Protection : All MS angles are made with the pure galvanization method, powder coatings and advanced paint systems, which allow for an extra layer of coatings on the angles. This improves the overall protection of the MS steel and makes it able to be used in any kind of environmental condition.
Applications of our MS Angle distributors and stockists in Pune:
Being the best MS Angle suppliers and distributors in Pune, all types of MS Angles are used in multiple types of applications for improving their performance, such as:
- High-rise building construction and bridge construction
- Heavy machine manufacturing
- Aerospace, defence and military equipment
- Marine hardware, chemical plant equipment and coastal construction
- Power generation and Petrochemical Processing
- Medical and pharmaceutical equipment
- Railway, highway and urban development construction
As former MS Angle suppliers in Pune, dealers, distributors and stockist in Pune, we as SM Enterprises are offering a high-quality MS Angle that is made with high-quality raw materials and a proper combination of external elements. This results in extra strength and hardness with more flexibility and the ability to apply in multiple applications. Contact us today for more information about our MS angle!